solar water heater(flat plate collector)

1. The Characteristics of Solar Collector
1) The fin is red copper strip with vacuum sputtering coating, and it has an excellent heat efficiency and a long life span.
2) The fin and riser pipe adopts ultrasonic welding, it has less weld seam and higher bearing strength.
2) The absorber covered by 4mm flat tempered glass with high transmission and good heat-insulating.
3) The heat transfer medium adopts special heat-conducting fluid, which can work with low ambient temperature and ensure a quick heat transfer.
4) The insulation is polyurethane with excellent heat-insulating, gives more protection for collector performance.
5) The frame is aluminium alloy with good resistance and nice outside, and easy to mount.
6) The connection including header pipe, riser pipe and screw is all copper, with high-elastic gasket, and the aging and leaking can be avoided perfectly.
2. ParametersDescription Specification
Cover
Cover number 1
Cover material Tempered glass
Cover thickness 4mm
Cover transmission >92%Absorber
Material Red copper (TP2) or Aluminium
Surface treatment Vacuum sputtering
Construction Pipe&fin ultrosonic welding (T type)
Header pipe Red copper ( TP2) ¦•22 mm?#948;0.8mm 2pcs
Riser pipe Red copper ( TP2) ¦•12mm?#948;0.6mm 8pcs
Absorption and emission Absorption> 92% +/-2%, emissionHeat-transfer fluid Special fluid, not be gasified, frost resistantInsulation
Material Mineral wool
Thick Back: 30mm or 50mm Side: 30mm
Density 24 or 48kg/ cubic meterFrame
Frame material A-alloy
Color Silver¡¢brown¡¢black
Back Galvanized sheet or aluminium sheet 0.4mm or 0.5mm
Working temperature -30¡¦¡«80¡¦
Working pressure 0.6Mpa
Gasket EPDM
Connection G3/4?
Hot water / O per day 65L ( 55¡¦)
Peak power 2.7KWH/ OSubsidiary electric power 1500W
Pump power 46W
Product No. Fin material Size(mm) Gross area
(mm) Absorber area
(mm) Net weight
(KG)
HBP/J150-C
Red copper 2020?50?5 1.9 1.5 37
HBP/J200-C 2020?230?5 2.5 2 50
HBP/J250-C 2020?510?5 3 2.5 63
HBP/J150-A
Aluminium 2020?50?5 1.9 1.5 37
HBP/J200-A 2020?230?5 2.5 2 50
HBP/J250-A 2020?510?5 3 2.5 63Water Tank and Controller
(1) Insulation: polyurethane foam 50mm
(2) Cover material: color sheetmetal or stain steel
(3) Inner tank: SUS 304-2B or enamel
(4) Operating pressure: 0.8Mpa, and excellent hot water output
(5)Operating temperature: -30 deg C ~ 50 deg C.
Control System: User friendly full automatic control by computer, yet allow customer modification flexibility.
The inlet and outlet of water pipe are designed to prevent electricity leakage with water resistor.
Automatic circulation, adopt advanced mini pump, steady, reliable, low noise and low wastage.
Advanced pressure protection system, steady pressure along with equipment protection.
Specification
Product No. Inner tank material Size Insulation Thick of outer tank Pressure Users
(person)
ST-80L
Stain
Steel 950?#65504;450 40 mm 0.7 0.8MPa 1-2
ST-100L 1200?#65504;450 40 mm 0.7 0.8MPa 2-3
ST-120L 1500?#65504;450 40 mm 0.7 0.8MPa 3-4
1130?#65504;515 40 mm 0.7 0.8MPa 3-4
ST-150L 1350?#65504;515 40 mm 0.7 0.8MPa 3-4
ST-200L 1570?#65504;515 40 mm 0.7 0.8MPa 5-6
TC-80L Enamel 950?#65504;450 40 mm 0.7 0.8MPa 1-2
TC-100L 1200?#65504;450 40 mm 0.7 0.8MPa 2-3
TC-120L 1500?#65504;450 40 mm 0.7 0.8MPa 3-4
1130?#65504;515 40 mm 0.7 0.8MPa 3-4
TC-150L 1350?#65504;515 40 mm 0.7 0.8MPa 3-4
TC-200L 1570?#65504;515 40 mm 0.7 0.8MPa 5-6
Features:1. The Characteristics of Solar Collector
1) The fin is red copper strip with vacuum sputtering coating, and it has an excellent heat efficiency and a long life span.
2) The fin and riser pipe adopts ultrasonic welding, it has less weld seam and higher bearing strength.
2) The absorber covered by 4mm flat tempered glass with high transmission and good heat-insulating.
3) The heat transfer medium adopts special heat-conducting fluid, which can work with low ambient temperature and ensure a quick heat transfer.
4) The insulation is polyurethane with excellent heat-insulating, gives more protection for collector performance.
5) The frame is aluminium alloy with good resistance and nice outside, and easy to mount.
6) The connection including header pipe, riser pipe and screw is all copper, with high-elastic gasket, and the aging and leaking can be avoided perfectly.
2. ParametersDescription Specification
Cover
Cover number 1
Cover material Tempered glass
Cover thickness 4mm
Cover transmission >92%Absorber
Material Red copper (TP2) or Aluminium
Surface treatment Vacuum sputtering
Construction Pipe&fin ultrosonic welding (T type)
Header pipe Red copper ( TP2) ¦•22 mm?#948;0.8mm 2pcs
Riser pipe Red copper ( TP2) ¦•12mm?#948;0